Materials & Takeoff

Board Foot Calculator: Lumber Volume, Quarters & Tally

Free board foot calculator for rough hardwood and nominal lumber. Enter thickness, width, length and quantity to get net board feet, waste allowance and linear feet.

Free online tool

Board foot calculator

Calculate net board feet, order board feet with waste, linear feet and cubic feet from board dimensions and quantity.

Order board feet (with waste)

132 bd ft

Net board feet
120 bd ft (12 bd ft per board × 10)
Total linear length
120 linear ft (10 × 12 ft)
Wood volume
10 ft³ before 10% waste

(2 in × 6 in × 12 ft ÷ 12) × 10 = 120 bd ft. × 1.1 = 132 bd ft.

Board footage is a volume unit: 1 board foot equals 144 cubic inches of wood (1 in × 12 in × 1 ft). Softwood construction lumber is sold by its nominal dimensions (a 2×6 is billed as 2 in × 6 in even though it surfaces to 1½ in × 5½ in). Rough hardwood is sold by quarter-inch thickness (4/4 = 1 in, 5/4 = 1¼ in, 8/4 = 2 in). Check how your supplier bills your species and grade before ordering.

A board foot measures wood volume: 1 inch thick by 12 inches wide by 1 foot long (144 cubic inches). Dimensional softwood is billed by its nominal callout (a 2×6 is tallied as 2 in × 6 in), while rough-sawn hardwood is sold in quarter-inch thicknesses such as 4/4, 5/4 and 8/4. Enter board thickness, width, length, piece count and waste above to calculate net board feet, order board feet and total linear footage.

How the board foot formula works

A board foot is a measurement of wood volume, not a flat surface area and not a running length. One board foot equals a piece of lumber 1 inch thick, 12 inches wide and 1 foot long, which is 144 cubic inches of solid timber. When you buy rough-sawn hardwood or compare wholesale softwood quotes, the yard prices the order by board footage so that thick slabs, wide planks and narrow strips can all be billed on the same volume basis.

Board feet (when length is in feet)   = Thickness (in) × Width (in) × Length (ft) × Quantity ÷ 12
Board feet (when all 3 are in inches) = Thickness (in) × Width (in) × Length (in) × Quantity ÷ 144

Keep the units matched to the divisor. If you measure thickness and width in inches and length in feet, divide by 12. If you measure all three dimensions in inches on a short cabinet cut list, divide by 144. Ten pieces of 2×6 lumber at 12 ft long contain (2 × 6 × 12 ÷ 12) × 10 = 120 board feet before waste, and 132 board feet with a 10% allowance.

Board feet per board for common nominal softwood sizes

Framing and dimensional softwood lumber is tallied from its nominal size—the rough green dimension before drying and planing—not the smaller dressed measurement on your tape. A dressed 2×6 measures 1 1/2 in by 5 1/2 in, yet the yard computes its board footage from 2 in by 6 in. Read across the table for the board footage of a single stick at standard stock lengths.

Nominal softwood board feet per single board
Nominal size (actual S4S)8 ft board10 ft board12 ft board16 ft board
1×4 (3/4″ × 3 1/2″)2.67 bd ft3.33 bd ft4.00 bd ft5.33 bd ft
1×6 (3/4″ × 5 1/2″)4.00 bd ft5.00 bd ft6.00 bd ft8.00 bd ft
1×8 (3/4″ × 7 1/4″)5.33 bd ft6.67 bd ft8.00 bd ft10.67 bd ft
1×12 (3/4″ × 11 1/4″)8.00 bd ft10.00 bd ft12.00 bd ft16.00 bd ft
2×4 (1 1/2″ × 3 1/2″)5.33 bd ft6.67 bd ft8.00 bd ft10.67 bd ft
2×6 (1 1/2″ × 5 1/2″)8.00 bd ft10.00 bd ft12.00 bd ft16.00 bd ft
2×8 (1 1/2″ × 7 1/4″)10.67 bd ft13.33 bd ft16.00 bd ft21.33 bd ft
2×10 (1 1/2″ × 9 1/4″)13.33 bd ft16.67 bd ft20.00 bd ft26.67 bd ft
2×12 (1 1/2″ × 11 1/4″)16.00 bd ft20.00 bd ft24.00 bd ft32.00 bd ft
4×4 (3 1/2″ × 3 1/2″)10.67 bd ft13.33 bd ft16.00 bd ft21.33 bd ft
6×6 (5 1/2″ × 5 1/2″)24.00 bd ft30.00 bd ft36.00 bd ft48.00 bd ft

Notice the shortcut inside the formula: when Thickness × Width equals 12 (as on a 1×12, a 2×6 or a 3×4), the 12 in the numerator cancels the 12 in the denominator, so board footage equals linear footage. A 12 ft 2×6 is 12 bd ft, and a 16 ft 1×12 is 16 bd ft.

Hardwood quarter-inch thickness notation (4/4 to 16/4)

Rough-sawn domestic and imported hardwoods are graded and sold by thickness expressed in quarters of an inch. Spoken aloud, 4/4 is "four-quarter" (1 inch rough), 5/4 is "five-quarter" (1 1/4 inches rough) and 8/4 is "eight-quarter" (2 inches rough). The calculator above accepts quarter notation directly in the Thickness box: type 5/4 or 8/4 and it divides the fraction automatically.

Hardwood quarter thickness, surfaced thickness and board feet per sq ft of face
Hardwood calloutRough-sawn thicknessTypical surfaced (S2S / S4S) thicknessBoard feet per 1 sq ft of face
4/4 (four-quarter)1 in (1.000″)13/16 in (0.8125″) or 3/4 in1.00 bd ft
5/4 (five-quarter)1 1/4 in (1.250″)1 1/16 in (1.0625″)1.25 bd ft
6/4 (six-quarter)1 1/2 in (1.500″)1 5/16 in (1.3125″)1.50 bd ft
8/4 (eight-quarter)2 in (2.000″)1 3/4 in (1.750″)2.00 bd ft
10/4 (ten-quarter)2 1/2 in (2.500″)2 1/4 in (2.250″)2.50 bd ft
12/4 (twelve-quarter)3 in (3.000″)2 3/4 in (2.750″)3.00 bd ft
16/4 (sixteen-quarter)4 in (4.000″)3 3/4 in (3.750″)4.00 bd ft

When a hardwood dealer planes rough 4/4 stock down to 13/16 in or 3/4 in (S2S or S4S), you still pay for the original 4/4 (1 in) rough thickness that went into the planer. For random-width rough hardwood bundles, mills measure the width of each board to the nearest whole inch at its midpoint and multiply by the rough quarter thickness.

Worked example: tallying a 5/4 hardwood project with waste

Suppose you are building a tabletop that requires six planks of 5/4 rough cherry, each 8 in wide and 10 ft long. Rough hardwood carries bark wane, end checks, knots and ripping loss, so cabinetmakers typically add a 15% to 25% waste allowance depending on the National Hardwood Lumber Association (NHLA) grade.

Single plank   = 1.25 in × 8 in × 10 ft ÷ 12 = 8.333 bd ft
Six planks net = 8.333 × 6 = 50.00 bd ft (60 linear ft)
With 20% waste = 50.00 × 1.20 = 60.00 bd ft

At an illustrative $7.50 per board foot for 5/4 cherry, the net wood in the finished parts has an illustrative value of $375.00, while the 60 bd ft rough order with 20% waste comes to an illustrative $450.00 before tax. Replace those sample prices with your supplier's current species and thickness sheet, because 8/4 and 12/4 stock command a higher rate than 4/4 stock of the same species.

Converting between board footage, linear feet and square feet

Trim carpenters and deck builders frequently receive material quotes priced by volume while their takeoff is in running linear feet. To convert between the two without re-measuring:

  • Linear feet to board footage: multiply linear feet by (nominal thickness × nominal width ÷ 12). For 2×8 joists, multiply linear feet by (2 × 8 ÷ 12) = 1.3333.
  • Board footage to linear feet: multiply total bd ft by 12 ÷ (nominal thickness × nominal width).
  • Price per board foot to price per linear foot: multiply the unit volume price by the board footage of a 1-foot piece. On a 2×10 (1.6667 bd ft per linear foot), an illustrative $1.20 per bd ft equals an illustrative $2.00 per linear foot.

Once you have your board count, open the cut list calculator to pack individual furniture or framing parts onto stock board lengths with saw-kerf allowance.

Frequently asked questions

How do you calculate board feet?

Multiply nominal thickness in inches by nominal width in inches by length in feet, then divide by 12. If all three measurements are in inches, multiply them together and divide by 144. Multiply the single-board result by the number of pieces.

Do I use actual or nominal dimensions for board feet?

Use nominal dimensions for softwood framing and dimensional lumber (use 2 × 4 for a 2×4, not 1.5 × 3.5). For rough-sawn hardwood, use the rough quarter thickness (such as 1.25 in for 5/4 stock) and the measured board width before jointing.

How many board feet are in a 2×4×8?

A single 8 ft 2×4 contains 2 × 4 × 8 ÷ 12 = 5.33 board feet. A 10 ft 2×4 is 6.67 board feet, and a 12 ft 2×4 is 8.00 board feet.

What does 4/4, 5/4 or 8/4 mean in hardwood lumber?

It is the rough-sawn thickness in quarters of an inch: 4/4 is 1 inch thick, 5/4 is 1 1/4 inches, 6/4 is 1 1/2 inches and 8/4 is 2 inches. Planing the faces (S2S) removes roughly 3/16 to 1/4 inch of thickness, but board footage is still calculated from the rough quarter size.

How much waste should I add to a board foot estimate?

For kiln-dried S4S dimensional softwood, 10% covers normal end trimming and culls. For rough-sawn random-width hardwood, cabinetmakers typically add 15% to 20% on FAS (Firsts and Seconds) grade and 25% to 35% on No. 1 Common grade to account for knots, sapwood, rip loss and jointing.

How these guides are prepared · Calculations and table values come from the same code as the free tools and are checked by automated tests and against the formulas in the Construction Pro app. Code references are for orientation: confirm requirements with your jurisdiction and your project documents. Found an error? Tell the developer.
Take the next job with you

Keep the calculation with the project.

Use feet-inch fractions, specialty trade tools and saved job calculations in Construction Pro for iPhone and iPad. Free download with in-app Pro options.

View on the App Store ↗

Keep working

Browse all guides